Cube in Bottle Project












A project more than a decade in the making, the secret behind one of magic’s greatest mysteries has finally been revealed.
David Strykers “Mystery Cubed” bottles have been a perennial sell-out since the first day they were launched. Magicians around the world cannot get enough of these impossible objects. They are the perfect addition to any magic room or accessory for any office.
Well now, along with help from Taylor Hughes, David Stryker is finally going to teach you his closely-guarded secrets behind making your own “Cube in Bottle Project” and how to use them for two jaw-dropping effects. This project is truly the pinnacle of cube Magic.
The 3 Major Secrets Unlocked in the “Cube in Bottle Project”:
How to Put a Rubik’s Cube in a Bottle
You’ll learn how to create your own impossible “cube in bottle” with an ingenious method that is surprisingly easy. Once you know how it’s done, it will only take you about 15-20 minutes to create a truly impossible souvenir that you, your clients or your friends and family will cherish forever. "Cube in Bottle Project" comes with all the tools you need to get started. And, when you want to make more, you’ll be amazed at how inexpensive it is to do so.
IMPORTANT NOTE: The moment about 40 seconds into the trailer is just a fun visual metaphor. A visual penetration of a cube into a bottle is NOT part of this project.
A Truly Breathtaking Mixed Cube Prediction
Known as “Reflections”, this is the same routine Taylor Hughes has used to close his professional act for nearly 5 years in everywhere from the Magic Castle to his virtual magic shows. You start by introducing a “cube in bottle.” Several members of the audience are then invited to mix up another cube. You then take the cube back and, impossibly, the pattern matches the one on the cube in the bottle. You can then hand everything to the audience members to examine or your client to keep forever if you’d like. Full details and performance rights included.
You can check out a full performance in the second video above.
The Mind-Boggling Bottle Solve
This is a stunning visual that will leave your audience’s jaws on the floor. While instantly solving a cube in your hands is pretty incredible. Doing it while it’s locked inside a bottle is truly a miracle-level effect. While this is the only time where you can’t hand the bottle out when you’re done. Don’t let that deter you. The visuals are phenomenal and the angles allow this to be performed in everything from in-person parlor shows to magic videos on TikTok or Instagram.
What’s in the Box?
Every “Cube in Bottle Project” comes with one bottle and a custom toolkit. We also teamed up with the King of cube magic Henry Harrius to provide you with three RD Regular Cubes (the best cubes for magic available today). You’ll be ready to start making your first impossible bottle right away.
“Cube in Bottle Project” is a must for anyone looking to leave their audience with a permanent memory of the feeling of magic you provided them. You can also, of course, use the skills learned to create unbelievably unique gifts for everyone in your life.
NOTE: While the performance of “Reflections” from the Magic Castle uses an "RD360" from Henry Harrius to complete the effect, Taylor used a different method for more than a year. That method is taught for anyone who doesn’t own the RD360 gimmick. Additionally, if you'd like to be set up to perform both "Reflections" OR the "Visual Solve", you'll need two bottles. Affordable refills are available here.

Customer reviews for Cube in Bottle Project
This is the most satisfying DIY project I've done for magic. Really fun.
I usually get disappointed when I order higher priced magic items because I find they are sub-standard in quality or lacking in some form or another, but this is not the case with this Cube In Bottle Project.
This “project”…to start, is wonderfully packed in a superbly designed box that keeps all the goodies safe and in place so nothing gets lost or damaged, and the box is gorgeous to boot. Now why is this important at all, well when I spend decent money on an effect, I love the fact that the creator(s) spent a little time on making sure that my reception and initial visual appeal of the item is pleasing, makes you feel like your purchase of their item was important to them and you spent your money wisely. Second, all the items in the package are of nice to excellent quality and the fact that they include 3 of the RD’s is amazing…way to give value to someone’s purchase…good job guys!!!
And lastly, the instructional video is absolutely fantastic and nothing is left out, finally a video that includes everything you see and more from the demo video included…again, well done!! The video is engaging, clear and nothing is left out. I felt like they were teaching slowly and clearly and they did it in a pleasant manner almost like they were enjoying sharing their knowledge…very pleasant.
One of the few items I would say I purchased that is ALMOST perfect…yes ALMOST..this has one little thing that was not included that I do not understand that could have been, and that would have made it absolutely perfect in my opinion….a small portion of the “paste” would have been greatly appreciated. To have such a complete and well designed product that has everything but that and now I have to run to find this stuff is annoying considering all is there to start upon receiving the ‘project”….but I digress.
Do not hesitate if you are on the fence about buying this, worth every penny they are asking!
member
Recently, a dear friend asked me to perform something for his husband’s 50th birthday party, and I shot him down. Still, he planted the seed, and just a few days later, this release hit my email inbox. Everything changed on a dime.
This is a *BEAUTIFUL* routine! The connection and drama it provides has leveled the room each performance, of which I’ve shared my third just hours ago. I am over the moon thrilled with this absolute gem of magic!
The instructions are spectacular. Clear, concise, and well filmed, it has become a total snap to build these bottles, which I’ve taken to giving away afterwards. A tremendous souvenir for your audiences. The routine instructions are also top notch, and terrific methods are shared for getting to the finale stage of the matching cube. It’s rare that my scripting will carry many elements from the original, shared routine, but there is so much in this script that’s perfect, it’s really hard NOT to use many of the technical lines about the cube, it’s history, and it’s 43 quintillion permutations.
This is the one though. This is the release that brought my brain back to magic again, after feeling shattered for far too long. I can’t recommend it enough. Well, WELL done. Thanks so much for sharing this one with the community!!!
The passion David and Taylor have for this work is undeniable. So much so I'm certain it's a crime against nature to employ their lessons unjustly. David's explanation of creating this impossible object is clear, impressive, and thoroughly detailed. Taylor's routine is nothing short of magical and he covers the handling of if easily enough for me to follow with very minimal experience with cube magic.
All together, this project was one of the best purchases I made in 2021 and I can't wait to explore the doors it has opened. Bravo to all involved and many thanks for choosing to share it.
This box came with everything that you need, and I mean absolutely everything, down to accessories that I'm willing to bet you have in your home.
I went from watching the video to getting my first cube in a bottle in just over a half-hour. I'm planning on ordering extra parts just to build more!
member
Perhaps I am the only person who actually attempted to put a cube in the bottles provided., but it is not (with an emphasis on the NOT) as easy as depicted in the video. To this end, I purchased extra bottles and cubes to allow for screw ups in case. So I am less than as enthusiastic as all of those giving this 5 stars. The routine presented here is excellent and for all intents easy to do with outstanding results. It may even be better than the Harrius Cube in Bottle. The major problem with this is the tutorial on execution and instruction for putting the cube in the bottle. The first problem is that the instructional video can be much more comprehensive with close ups views of some of the actions. Some of this is glossed over without clear video and close up shots. There are even sections that have him showing a camera that is not even in the video. It is much more difficult that it appears here. The second major problem with this trick is that the shape of the bottle used is convex at the bottom. Therefore, the cube does not sit flat on the bottom of the bottle. This makes it nearly impossible to assemble the cube without it falling apart due to it "rocking" on the bottom. All in all it is a great routine, well explained except for the construction of the cube in the bottle which is basically why I bought this. Perhaps a flat bottom bottle would make this 5 stars.
member
I love the shape of the bottles and purchased extras.
The supplied Henry Harrius RD Regular cube is easy to place in the bottle. But be aware that if you want to place other types of Rubik’s cubes from different manufacturers in the bottle the project could be A LOT more difficult due to the differences in construction of various cubes. Took me 3 hours to place a stickerless Yulong cube in the bottle and I had to use quite a bit of ingenuity to get it done!
I like the look of stickered cubes in the bottle. The stickerless cubes do not look as good to me.
Highly recommended!
the instruction are well explained and clear
it did take longer than expected but with practice it will become easier and quicker
the choice of cube configuration in the bottle is up to you so be prepared to think long and hard before you commit yourself
can't fault it
If I can give it a rating, it would definitely be beyond Excellent! I've been waiting for this project to be re-released for the longest time and fell in love with the routine ever since I saw Taylor's Chasing Wonder performance. Just a bit of background information, I have been performing cards and coins for the longest time (cards more so), and recently got into Rubik's Cube magic. That was when I started to get on YouTube to watch various performances and found out about Taylor Hughes'.
The box is beautiful, technically they could have released this as a download without any of the tools at a lower price but after receiving the box, I finally understood why they didn't want to take that approach. EVERYTHING required to build the cube in the bottle is inside the box and I mean EVERYTHING.
You will receive the tools required to put your cube in the bottle. You will receive x3 Henry Harrius' RD cubes, a bottle, x2 tools and a towel (it will be explained once you watch the video). You will also get the TV rights. The price is definitely worth it as including the tools and bottles and cubes would be already half of what you're paying, and the rest goes into the routine and learning how to put the cube in the bottle. I might add it also proves to be a nice gift if you wish to build one and gift it away.
You will be taught 2 tricks (3 if you include how to put a cube in the bottle because it looks impossible as Hell). The first is a "bottle solve" and the second is "Reflection". The former is basically solving the cube while it is inside the bottle, of which you CANNOT hand it out for inspection. The second is "Reflection", the routine in Taylor Hughes' Chasing Wonder whereby a mixed up cube from the audience matches the one inside the bottle. This can be handed out for inspection and given out as a souvenir if you wish to.
David Stryker's instructions getting the cube inside the bottle is extremely thorough and clear. He gives a good guide on how it is to be done and teaches you a step-by-step process. You will need 30mins or so to do it. It gets easier each time. I suggest getting the refills as well because the price is worth it and you may want to stock up the bottle in case you wish to give them out as gift.
Some of the more common questions will be answered in this section of the review. As mentioned in the description, Taylor uses a separate Henry Harrius' RD 360 as part of his performance, but this is NOT necessary as he will teach you how to perform without this. In fact, he has been performing WITHOUT the RD 360 for 3 years and the method will be taught.
You do NOT need to know how to solve the cube although it would be nice if you do. This is so that if someone tries to mess up your cube (which shouldn't happen if you have proper audience management), you can easily solve it and put it back into the pattern as the one in the bottle at the end of the show. You do NOT need to know any stack, although again it would be nice if you did.
And to end off this review, if you haven't ordered it yet, you should!
member
member
member
The tutorial is great, the instruction is very clear, nothing rushed and will take you step by step through everything.
Plus you really do get everything you need to build your cube in bottle.
The satisfaction from just doing that is worth the purchase but actually using the bottle in a routine is brilliant and although I do a totally different cube match myself to the one taught, having the cube in bottle elevates it to another level and is worth the purchase for anyone doing a cube match effect.
Thank You
In my opinion, this is not just a magic trick; it’s a piece of art.
And a final note: I truly hope replacement bottles will be available… as I’d love to make more, especially to give as unique and unforgettable gifts.
Also shown is a way of solving the shuffled cube that is in the bottle and if you use your favorite stack, you can solve the audience shuffled cube too!
The gimmicks are well made and the instruction is very clear and shows you how to insert your cube inside the bottle. I am waiting for more matching bottles to become available from Vanishing inc. Until then, I was able to find another kind of bottle online that will work.
Great for parlour and I will use it for stage venues. The video is thorough and clear. Much satisfaction is gained when you complete it and I decided to add the 360RD to the routine. The bonus routine is very visual and worth a look. Thank you for a great routine!
Community questions about Cube in Bottle Project
Have a question about this product? It's possible others do too. Ask here and other Vanishing Inc. Magic customers will be able to respond with assistance! Alternatively, email us and we can help too.
Christopher asks: Could you do the smash the cube into the bottle effect with this kit or is that only possible with Henry’s Cube in Bottle?
- 1. Vanishing Inc. Magic responds:This is only possible with Henry’s edition
Jacob asks: Hi. I have some questions if you wouldn't mind helping please. Does the project teach you how to go from the match straight into the solve in bottle? Also is it possible to reset the solved cube in bottle to mixed again without re building? If so how long would that reset be? Lastly any idea when the refill bottles will be in stock? Thanks
- 1. Vanishing Inc. Magic responds:Hey, Please email us at Wizards@vanishingincmagic.com and we can discuss this in detail with you. Thanks
Matthew asks: I am relatively new to cube magic. What algorithm do you use for reflections? I’ve seen a couple but they don’t appear as mixed as I would like. Thanks.
- 1. Vanishing Inc. Magic responds:You can use any algorithm, it can even be a random mix as long as you remember how to get into it.
Sonia asks: Do you need a paper bag for Reflections routine?
- 1. Jim responds:Two methods are taught, and only one uses a paper bag. The other uses a scarf. So, you have options.
Michael asks: How long does it take to reset?
- 1. Vanishing Inc. Magic responds:About 1-2 minutes.
Joe asks: The Visual Bottle Solve looks almost like Trick Photography. Is this the "Bottle Solve" that really comes with the Cube in Bottle Project?
- 1. Vanishing Inc. Magic responds:Yes, you'll learn how to build it and then how to perform the solve.
David asks: Any update please on where to purchase jars in the UK for Cube in Bottle Project?
- 1. Vanishing Inc. Magic responds:Right here: https://www.vanishingincmagic.com/refills/bottle-refills-for-cube-in-bottle-project/
Fernanda asks: Can I perform the instantaneous solving cube in the same presentation that I perform the matching effect??
- 1. Vanishing Inc. Magic responds:With some modification to the routine, it is definitely possible.
William asks: Can the bottles hold a bridge sized card deck?
- 1. Vanishing Inc. Magic responds:Probably but they are better suited for the cube.
Rory asks: how long does it take to put the cube in the bottle
- 1. Jim responds:15 to 20 minutes if you are skilled and dedicated. 30 to 40 minutes for medium skill. And so on. YMMV.
- 2. Guy responds:Took me a few hours the first time i tried, I mucked it up a few times, but it got easier, I know now that the next one, will be Quicker
10 questions


